Epson ET-3600 Printer 30-Day Reset Tutorial and Support

Did an error occurred during Reset Epson ET-3600 30D?

What should you do when the Epson EcoTank ET-3600 starts flashing all lights?

When the Epson EcoTank ET-3600 shows all indicator lights blinking at the same time, the printer is signaling an internal protection warning. Based on Epson service documentation, this condition is usually related to the waste ink pad counter reaching its predefined safety limit. To confirm whether the printer requires a 30-Day Reset, a basic diagnostic check must be carried out.

1 – With the Epson EcoTank ET-3600 turned on, send any print job to the printer, such as a simple document or image.

2 – Since all lights are flashing, an error notification should automatically appear on your computer screen through Epson Status Monitor 3.

3 – If no message appears, the printer drivers may not be installed correctly. Download and install the official Epson EcoTank ET-3600 drivers directly from the Epson.com website, then restart your computer.

4 – After installing the drivers, repeat the print test and carefully check the message displayed in Epson Status Monitor 3. If the alert mentions waste ink counter, service required, or end of service life, a reset is required.

5 – In these situations, the 30-Day Reset Program for Epson EcoTank ET-3600 is the appropriate solution to temporarily unlock the printer.

6 – If the error refers to paper jams, scanner issues, communication errors, offline status, or any physical malfunction, the reset software will not correct the problem.

How to perform the 30-Day Reset on the Epson EcoTank ET-3600

1 – Power on your Epson EcoTank ET-3600 and connect it to your Windows computer using a USB cable.

2 – Download the 30-Day Reset software for Epson EcoTank ET-3600 from our website and activate it using the license key sent to your email after payment approval.

3 – Follow each step shown in the detailed video tutorial available on the download page to ensure the reset is completed correctly.

4 – Once the process is complete, the software will request that you turn off the printer. Turn off the Epson EcoTank ET-3600, wait a few seconds, and then turn it back on.

5 – After restarting, print a test page to verify that the Epson EcoTank ET-3600 has been successfully unlocked and is fully operational for the 30-day period.

6 – If necessary, professional remote technical support is available to assist you throughout the entire 30-Day Reset process safely and efficiently.