- You are here:
Step-by-Step Guide: Resetting Epson L Series Printer Maintenance
Use our effective method to reset any Epson L Series model. Clear waste ink pad counters and resolve flashing light errors quickly and easily.
What is the Reset Epson L for?
The Reset Epson L Series is required when printers from the Epson L Series display warnings such as “Ink Pad is at the End of its Service Life,” “Service Required,” or “A Printer Component Has Reached the End of its Life.” According to Epson’s official documentation, these alerts are generated by an internal protection system designed to prevent waste ink overflow and protect the electronic and mechanical components of Epson L Series printers.
What should you do when an Epson L Series printer starts flashing all lights?
When all indicator lights on an Epson L Series printer begin flashing continuously, it usually means the device has entered a safety lock mode. This condition is most commonly related to the internal waste ink pad counter reaching its predefined limit. To correctly identify the cause, Epson recommends checking the system message using the official Epson Status Monitor software.
1 – Send any print command to your Epson L Series printer and observe the message displayed by Epson Status Monitor on your computer screen.
2 – If the message refers to the waste ink pad, internal counter overflow, service required, or end-of-life warning, this confirms the need to perform the Reset Epson L Series.
3 – If no error message appears, the printer drivers may not be correctly installed. Download and install the official drivers for your specific Epson L Series model directly from Epson.com, restart your computer, and repeat the test print.
How to Reset the Waste Ink Pad Counter on Epson L Series Printers
The reset procedure for Epson L Series printers is safe and straightforward when performed correctly. No advanced technical skills are required. You only need a Windows-based computer with internet access, the Epson L Series printer powered on, and connected via a USB cable.
Epson printers from the L Series use a dedicated service utility to reset the internal waste ink pad counter. This utility is commonly referred to as the Reset Epson L Series software and is specifically designed to communicate with the printer’s internal system.
1 – Download the reset software using the secure link sent to the email address provided during your purchase.
2 – Activate the software using the unique activation key included in the same email, located below the download link and tutorial information.
3 – On the download page, you will also find a complete step-by-step video tutorial. Follow all instructions carefully as demonstrated.
4 – After the reset process is completed, turn off the Epson L Series printer, wait a few seconds, and turn it back on. The printer will be fully unlocked and ready for normal operation.
What Is the Ink Pad Inside Epson L Series Printers?
All Epson L Series printers include an internal waste ink absorption system, commonly known as the ink pad or waste ink absorber.
Each time the printer is powered on, automatic initialization and printhead cleaning cycles are performed. During these processes, unused ink is flushed into the internal ink pad.
In addition, routine printing and maintenance operations periodically direct residual ink into this absorber as part of normal printer operation.
When the ink pad reaches its calculated maximum absorption capacity, Epson L Series printers automatically lock to prevent ink leakage that could damage internal electronics and mechanical parts.
To completely resolve this condition, two actions are recommended:
• Clean or replace the internal waste ink pads, or install an external ink drainage system.
• Perform the Reset Epson L Series to reset the internal waste ink counter responsible for the printer lock.
After payment confirmation, you will receive an email similar to the example below.
This email contains your activation key, the official download link for the Reset Epson L Series software, and access to a detailed video tutorial on the same page.
Simply open the download link and follow the instructions carefully to complete the reset process safely.
Reset Epson L Series: Free Software vs Licensed Software