- You are here:
- Reset Epson ET
- Reset Epson ET-4500
Unlimited Epson ET-4500 Reset Tutorial: Step-by-Step Guide
Use this professional tutorial for an unlimited reset of your Epson ET-4500. Clear the waste ink pad counter and keep printing without limits.
To install first, download the
Reset Epson Printer ET-4500 Unlimited in the button below
Compatible Models
ET-4500
After downloading Reset Epson ET-4500 Unlimited, follow exactly the steps in the video tutorial next to it
Did an error occurred during Reset Epson ET-4500 Unlimited?
What should you do when the Epson EcoTank ET-4500 starts flashing all lights?
When the Epson EcoTank ET-4500 displays all indicator lights flashing continuously, the printer is signaling that an internal protection limit has been reached. This condition is commonly linked to the waste ink pad counter reaching its maximum value, which activates a system lock to prevent internal ink overflow.
To determine whether the printer requires the Unlimited Reset for Epson EcoTank ET-4500, it is important to follow a simple diagnostic process using Epson’s official monitoring system.
1 – Make sure the Epson EcoTank ET-4500 is powered on and connected to your Windows computer.
2 – Send any print command to the printer, such as a document or image file.
3 – Because the printer lights are flashing, Epson Status Monitor 3 should automatically display an error message on your screen.
4 – If no message appears, this usually means the printer drivers are not correctly installed. Download and install the original Epson EcoTank ET-4500 drivers directly from the official Epson website.
5 – After installing the drivers, restart your computer, repeat the print test, and carefully review the message shown by Epson Status Monitor 3.
6 – If the message mentions waste ink pad, service required, internal counter overflow, or end of service life, the printer requires the Unlimited Reset Epson EcoTank ET-4500.
7 – If the error refers to paper jam, scanner malfunction, communication failure, offline status, or physical hardware damage, the reset software will not resolve the issue.
How to perform the Unlimited Reset on the Epson EcoTank ET-4500
1 – Turn on the Epson EcoTank ET-4500 and connect it to your Windows computer using a USB cable. Wireless connections are not recommended during the reset process.
2 – Download the Unlimited Reset software for Epson EcoTank ET-4500 from our official website.
3 – Activate the reset program using the unique license key sent to your email immediately after payment confirmation.
4 – Access the step-by-step video tutorial available on the download page and follow each instruction exactly as demonstrated.
5 – During the reset process, the software will clear the internal waste ink pad counter without altering firmware or printer settings.
6 – Once the reset is completed, the program will prompt you to turn off the printer. Power off the Epson EcoTank ET-4500, wait a few seconds, and then turn it back on.
7 – After restarting, print a test page to confirm that the Epson EcoTank ET-4500 has been fully unlocked and is operating normally with no error messages.
8 – If assistance is required, professional remote technical support is available to guide you safely through the entire unlimited reset procedure.
Additional information
Printer model | Epson ET-4500 |
Duration | Unlimited |
Transfers per year | 2 times per year |
Online support | Yes |
reset percentage | 100% of the counter |
Warranty | Total |

