Epson ET-4500 Printer 30-Day Reset Tutorial and Support

Did an error occurred during Reset Epson ET-4500 30D?

What should you do when the Epson EcoTank ET-4500 starts flashing all lights?

When all indicator lights on the Epson EcoTank ET-4500 begin flashing at the same time, the printer is indicating that an internal protection threshold has been reached. This behavior is typically related to the waste ink pad counter reaching its predefined limit, which causes the printer to temporarily lock itself.

Before proceeding, it is important to confirm whether this condition requires a reset by performing a basic diagnostic check using Epson’s official Status Monitor software.

1 – With the Epson EcoTank ET-4500 powered on, send any print job to the printer, such as a text document or image.

2 – Because the printer lights are flashing, an error notification should automatically appear on your computer screen through Epson Status Monitor 3.

3 – If no message appears, the printer drivers may not be correctly installed. Download and install the official Epson EcoTank ET-4500 drivers directly from the Epson website.

4 – After installing the drivers, restart your computer, repeat the print test, and carefully read the message displayed by Epson Status Monitor 3.

5 – If the message refers to waste ink counter, service required, internal counter overflow, or end of service life, the printer qualifies for the 30-Day Reset Program for Epson EcoTank ET-4500.

6 – If the alert is related to paper jams, scanner errors, communication problems, offline status, or physical hardware faults, the reset software will not correct the issue.

How to perform the 30-Day Reset on Epson EcoTank ET-4500

1 – Turn on the Epson EcoTank ET-4500 and connect it to your Windows computer using a USB cable to ensure stable communication.

2 – Download the 30-Day Reset software for Epson EcoTank ET-4500 from our official website.

3 – Activate the software using the license key sent to your email immediately after payment confirmation.

4 – Carefully follow each step shown in the video tutorial provided on the download page to complete the reset correctly.

5 – Once the reset procedure is finished, the software will prompt you to turn off the printer. Power off the Epson EcoTank ET-4500, wait a few seconds, and then turn it back on.

6 – After restarting, print a test page to confirm that the Epson EcoTank ET-4500 has been successfully unlocked for use during the 30-day period.

7 – If necessary, professional remote technical support is available to assist you throughout the entire 30-day reset process in a safe and controlled manner.