Tutorial: Epson L4156 waste
ink reset, 30 days.
Follow these instructions to reset your Epson L4156 waste ink pad counter with the 30-Day key. The tutorial covers download, USB connection, key entry and counter reset — valid for 30 days.
Activation key required · Don't have a key? Click here
Download the Epson L4156
30-day reset software.
Download the 30-day programme first. Then watch the video tutorial and follow each step alongside it.
Download the 30-day reset software specific to the Epson L4156. Run it as Administrator after downloading.
Don't have a 30-day key? Click here to purchase
Same process as the Unlimited version — only the software file differs. Watch before starting and follow each stage alongside the tutorial.
Unlike free solutions that partially reset the counter, our reset clears 100% of the internal counter — from wherever it was back to zero. The printer returns to full normal operation with no residual counter value.
Your Epson L4156 has an internal waste ink counter. The reset clears this counter to 0%. With normal printer use, the counter gradually rises back to 100% — when the printer locks again.
The time this takes depends on how much you print:
print shops & offices
small businesses
home printing
The download above is free, but an activation key is required to run the reset. Purchase the 30-day plan or consider the Unlimited licence if you print frequently.
Follow this exact order.
Do not skip any steps. Each stage is necessary for the reset to complete correctly.
Try printing any document and observe the message in the Epson Status Monitor. If the message mentions "ink pads" or "end of service life", this reset resolves it. If no message appears, reinstall the Epson drivers and repeat the test.
Click the download button above. After downloading, right-click the file and select "Run as Administrator". This is mandatory — without administrator permissions the reset will not work.
Switch on the Epson L4156 and connect the USB cable to the computer before opening the programme. The printer must be detected by the software for the reset to work.
Copy and paste the 30-day activation key received in your email — do not type it manually to avoid errors. The key has no spaces before or after. Once activated, the programme is ready.
With the printer connected and the programme activated, click Particular ink pad counter then Check. Next click Initialization and confirm. The counter goes to zero — 100% cleared. Follow the video tutorial exactly.
Once the reset is complete, switch the Epson L4156 off at the mains, wait 10 seconds and switch it back on. This step is mandatory — without it the new settings are not applied.
Purchase now and
reset in minutes.
Activation key, software and tutorial dispatched automatically by email within 30 seconds. Resets 100% of the counter — full guarantee.