Complete Tutorial for Unlimited Epson L380 Printer Reset

Did an error occurred during Reset Epson L380 Unlimited?

What should you do when the Epson EcoTank L380 flashes all lights?

When the Epson EcoTank L380 starts flashing all indicator lights simultaneously, the printer is signaling that an internal protection limit has been reached. This condition is commonly related to the waste ink pad counter reaching its predefined service threshold. To determine whether the situation requires an Unlimited Reset, a proper verification must be carried out using Epson’s official monitoring tools.

1 – With the Epson EcoTank L380 powered on, send any print job to the printer, such as a simple document or test image.

2 – Due to the blinking lights, an alert message should automatically appear on your computer screen through Epson Status Monitor 3.

3 – If no message is displayed, the printer drivers may not be properly installed. Download and install the official Epson EcoTank L380 drivers directly from the Epson website, restart your computer, and repeat the print test.

4 – After reinstalling the drivers, check the message shown in Epson Status Monitor 3. If it indicates waste ink pad counter overflow, service required, or end of service life, an Unlimited Reset is necessary.

5 – In these specific cases, the Unlimited Reset for Epson EcoTank L380 is the most effective and permanent solution to unlock the printer.

6 – If the error is related to paper jams, scanner malfunction, communication failure, offline status, or physical hardware issues, the reset software will not correct the problem.

How to perform the Unlimited Reset on the Epson EcoTank L380

1 – Turn on the Epson EcoTank L380 and connect it to your Windows computer using a USB cable.

2 – Download the Unlimited Reset software for the Epson EcoTank L380 from our website and activate the program using the license key sent to your email after purchase confirmation.

3 – Carefully follow all instructions provided in the step-by-step video tutorial included with the download.

4 – Once the reset process is completed, the software will instruct you to power off the printer. Turn off the Epson EcoTank L380, wait a few seconds, and turn it back on.

5 – After restarting, print a test page to confirm that the Epson EcoTank L380 has been fully unlocked and is operating normally without any warning lights.

6 – If needed, professional remote technical support is available to assist you throughout the entire Unlimited Reset process safely and efficiently.