Complete Guide for Unlimited Epson L396 Printer Resets

Did an error occurred during Reset Epson L396 Unlimited?

What should you do when the Epson EcoTank L396 starts flashing all lights?

When the Epson EcoTank L396 begins flashing all indicator lights at the same time, the printer is signaling that an internal protection mechanism has been activated. According to Epson’s maintenance logic, this behavior usually occurs when the waste ink pad counter reaches its predefined limit. At this stage, the printer is automatically locked to avoid internal ink leakage and potential damage.

1 – Make sure the Epson EcoTank L396 is powered on and connected to your Windows computer using a USB cable. Then send a simple print job, such as a text file or test page.

2 – Because the printer is locked, an error message should appear automatically on your computer screen through Epson Status Monitor 3.

3 – If no message appears, this usually means the printer drivers are missing or outdated. Download and install the official Epson EcoTank L396 drivers directly from the Epson website, restart your computer, and repeat the print test.

4 – Carefully read the message shown in Epson Status Monitor 3. If the alert mentions waste ink pad, service required, end of service life, or maintenance error, this confirms that the Unlimited Reset procedure is required.

5 – In this scenario, the Unlimited Reset for Epson EcoTank L396 is the correct solution to clear the internal counter and restore printer functionality.

6 – Please note that reset software does not fix hardware problems such as paper jams, scanner errors, communication failures, offline status, or physical damage.

How to perform the Unlimited Reset on the Epson EcoTank L396

1 – Turn on the Epson EcoTank L396 and connect it to your Windows computer using a USB cable. Ensure the printer is detected correctly by the operating system.

2 – Download the Unlimited Reset software for the Epson EcoTank L396 from our official page. After purchase confirmation, an activation key will be sent to your email address. Use this key to unlock the software.

3 – On the same download page, you will have access to a complete video tutorial. Follow each step carefully, exactly as demonstrated, to avoid interruptions during the reset process.

4 – Once the reset procedure is completed, the software will request that you turn off the printer. Power off the Epson EcoTank L396, wait a few seconds, and then turn it back on.

5 – After restarting, print a test page to verify that the Epson EcoTank L396 is fully unlocked and operating normally without warning messages or flashing lights.

6 – If you experience any difficulty during the process, professional remote technical support is available to assist you step by step, ensuring a safe and successful reset.