- You are here:
- Reset Epson L
- Reset Epson L455
Complete Guide for Unlimited Epson L455 Printer Reset Fix
Follow our comprehensive guide to clear the waste ink counter of your Epson L455 multiple times. A permanent solution for your maintenance needs.
To install first, download the
Reset Epson Rinter Unlimited in the button below
Compatible Models
L455
After downloading Reset Epson L455 Unlimited, follow exactly the steps in the video tutorial next to it
Did an error occurred during Reset Epson L455 Unlimited?
What should you do when the Epson EcoTank L455 starts flashing all lights?
When the Epson EcoTank L455 displays all indicator lights flashing at the same time, it means the printer has entered a protection mode controlled by its internal system. This situation is most commonly related to the waste ink pad counter reaching its predefined limit. To confirm whether the issue requires an Unlimited Reset, follow the diagnostic steps below.
1 – With the Epson EcoTank L455 powered on, send a print job such as a document or image from your computer.
2 – When the printer lights are flashing, Epson Status Monitor 3 should automatically display an error message on your screen.
3 – If no message appears, it is likely that the printer drivers are missing or outdated. Download and install the official Epson EcoTank L455 drivers directly from Epson’s official website.
4 – After installing the drivers, repeat the print test and carefully read the message shown by Epson Status Monitor 3. If it refers to waste ink pads, service life exceeded, internal counter limit, or maintenance required, the Unlimited Reset procedure is necessary.
5 – In this scenario, the Unlimited Reset for Epson EcoTank L455 is the correct and effective solution to unlock the printer and restore normal operation.
6 – If the error message is related to paper jams, scanner errors, connection problems, offline status, or physical hardware failures, the reset software will not resolve those issues.
How to perform the Unlimited Reset on the Epson EcoTank L455
1 – Turn on the Epson EcoTank L455 and connect it to your Windows computer using a USB cable.
2 – Download the Unlimited Reset software for the Epson EcoTank L455 from our website and activate it using the license key sent to your email after payment confirmation.
3 – Open the included video tutorial and carefully follow each step to ensure the reset process is completed correctly and safely.
4 – When the software confirms that the reset is finished, turn off the Epson EcoTank L455, wait a few seconds, and then turn it back on.
5 – After restarting, print a test page to verify that the Epson EcoTank L455 has been fully unlocked and is operating normally without warning messages.
6 – If assistance is required, professional remote technical support is available to guide you through the entire Unlimited Reset process.
Additional information
Printer model | Epson L455 |
Duration | Unlimited |
Transfers per year | 2 times per year |
Online support | Yes |
reset percentage | 100% of the counter |
Warranty | Total |

