Step-by-Step Tutorial for Unlimited Epson L565 Printer Reset

Did an error occurred during Reset Epson L565 Unlimited?

What should you do when the Epson EcoTank L565 starts flashing all lights?

When the Epson EcoTank L565 begins flashing all indicator lights at the same time, the printer is reporting an internal protection alert. This condition is commonly associated with the waste ink pad counter reaching its predefined service limit. To accurately determine whether the issue requires an Unlimited Reset, a basic verification process must be performed following the steps below.

1 – With the Epson EcoTank L565 powered on, send any print job, such as a simple text document or image file, to the printer.

2 – Because all lights are flashing, an error notification should automatically appear on your computer screen through Epson Status Monitor 3.

3 – If no message appears, the printer drivers may not be installed correctly. Download and install the original Epson EcoTank L565 drivers directly from the official Epson website.

4 – After installing the drivers, repeat the print test and carefully review the message displayed in Epson Status Monitor 3. If the alert refers to waste ink pad counter, service required, or end of service life, an unlimited reset will be required.

5 – In these specific cases, the Unlimited Reset for Epson EcoTank L565 is the most effective and permanent solution.

6 – If the error message indicates paper jams, scanner malfunction, communication failure, offline status, or any physical hardware issue, the reset software will not resolve the problem.

How to perform the Unlimited Reset on the Epson EcoTank L565

1 – Turn on the Epson EcoTank L565 and connect it to your Windows computer using a USB cable.

2 – Download the Unlimited Reset software specifically developed for the Epson EcoTank L565 from our website and activate it using the license key sent to your email after payment confirmation.

3 – Carefully follow every step shown in the detailed video tutorial provided next to the download link to ensure the procedure is completed correctly.

4 – Once the reset process is completed, the software will prompt you to turn off the printer. Power off the Epson EcoTank L565, wait a few seconds, and turn it back on.

5 – After restarting, print a test page to confirm that the Epson EcoTank L565 has been fully unlocked and is operating normally without error messages.

6 – If required, professional remote technical support is available to assist you throughout the entire reset process, ensuring a safe and hassle-free experience.