Unlimited Epson ET-2720 Reset Tutorial: Step-by-Step

Did an error occurred during Reset Epson ET-2720 Unlimited?

What should you do when the Epson EcoTank ET-2720 starts flashing all lights?

When the Epson EcoTank ET-2720 begins flashing all indicator lights at the same time, the printer is signaling that an internal protection mechanism has been activated. In most situations, this behavior is directly related to the waste ink pad counter reaching its maximum programmed value. To correctly determine whether an Unlimited Reset is required, a basic diagnostic check must be performed as described below.

1 – With the Epson EcoTank ET-2720 powered on, send any print job to the printer, such as a simple text document or image file.

2 – Because the printer lights are flashing, an error notification should automatically appear on your computer screen through Epson Status Monitor 3.

3 – If no message is displayed, the printer drivers may not be properly installed. Download and install the original Epson EcoTank ET-2720 drivers directly from the official Epson website.

4 – After installing the drivers, repeat the print test and carefully analyze the message shown in Epson Status Monitor 3. If the alert mentions waste ink pad counter, service required, internal maintenance limit, or end of service life, the reset procedure is necessary.

5 – In these specific cases, the Unlimited Reset for Epson EcoTank ET-2720 is the most effective solution to permanently unlock the printer.

6 – If the error is related to paper jams, scanner malfunction, communication failure, offline status, or any physical hardware issue, reset software will not resolve the problem.

How to perform the Unlimited Reset on the Epson EcoTank ET-2720

1 – Turn on the Epson EcoTank ET-2720 and connect it to your Windows computer using a USB cable. Make sure the connection is stable before proceeding.

2 – Download the Unlimited Reset software for Epson EcoTank ET-2720 from our website and activate the program using the license key sent to your email after payment confirmation.

3 – Open the software and follow each step shown in the detailed video tutorial included next to the download link. This ensures the reset is executed correctly and safely.

4 – Once the reset process is completed, the program will request that you turn off the printer. Power off the Epson EcoTank ET-2720, wait a few seconds, and then turn it back on.

5 – After restarting, print a test page to confirm that the Epson EcoTank ET-2720 has been fully unlocked and is operating normally without warning messages.

6 – If assistance is required at any stage, professional remote technical support is available to help complete the Unlimited Reset process quickly and securely.