Detailed Manual for Perpetual Maintenance Resets on T50 Photo Model

Did an error occurred during Reset Epson T50 Unlimited?

What to do when the Epson Workforce T50 printer blinks all its lights?

When the Epson Workforce T50 starts blinking with all its lights active, the device is signaling a critical internal system alert. This behavior is typically related to the waste ink pad counter that has reached its programmed limit. To correctly confirm if the problem requires an Unlimited Reset, it is necessary to perform a basic diagnostic verification by following the steps outlined below.

1 – With the Epson Workforce T50 printer powered on, send any print job, such as a text document or an image file.

2 – Due to the blinking lights, the specific error message should automatically appear on your computer screen via the Epson Status Monitor 3 utility.

3 – If no message is displayed, it is possible that the drivers are not installed correctly. Download and install the original drivers for the Epson Workforce T50 from the official Epson website.

4 – Once the drivers are installed, repeat the print attempt and review the message shown in Epson Status Monitor 3. If the alert indicates ink pad counter, service required, or end of service life, a reset will be necessary.

5 – For these specific cases, the Unlimited Reset for Epson Workforce T50 is the most suitable and long-term solution.

6 – If the error corresponds to paper jams, scanner malfunctions, communication problems, printer not detected, or other physical hardware faults, the reset procedure will not resolve the underlying issue.

How to perform the Unlimited Reset on the Epson Workforce T50

1 – Turn on your Epson Workforce T50 and connect it to a Windows computer using a functioning USB cable.

2 – Download the Unlimited Reset tool for Epson Workforce T50 from our website and activate the software with the license key sent to your email after purchase.

3 – Carefully follow each step of the video tutorial included with the main download file.

4 – Upon completing the procedure, the program will notify you to power off the printer. Turn off the Epson Workforce T50, wait about 10 seconds, and turn it back on.

5 – After the full system restart, print a test page to verify that the Epson Workforce T50 is completely unlocked and ready for normal operation.

6 – If preferred, we offer a remote technical support service to guide you through the entire process, ensuring a successful outcome without complications.