Simple Way to Reset Epson L385 Waste Ink Pad Counter Tool

The Reset Epson EcoTank L385 is required when the printer displays warnings such as “Ink Pad is at the End of its Service Life,” “Service Required,” or when all indicator lights begin flashing continuously. These alerts are generated by Epson’s internal protection system, designed to prevent ink overflow and safeguard the internal electronics of the Epson EcoTank L385.

Why does the Epson EcoTank L385 stop printing and flash all lights?

The Epson EcoTank L385 continuously monitors internal maintenance operations such as printhead cleaning, ink charging, and nozzle flushing. During these processes, excess ink is collected inside the waste ink pads. When the internal counter reaches its programmed safety limit, the printer automatically locks to avoid ink leakage.

This lock condition is not related to mechanical failure or cartridge issues, but rather to a calculated maintenance threshold defined by Epson.

1 – Send a print job to the Epson EcoTank L385 and carefully observe the error notification displayed by Epson Status Monitor 3.

2 – If the message refers to waste ink pads, internal counter overflow, or end of service life, the printer requires the Reset Epson EcoTank L385.

3 – If no alert appears, reinstall the official Epson EcoTank L385 drivers from the Epson website, restart the system, and repeat the test.

How to Reset the Waste Ink Counter on Epson EcoTank L385

The reset procedure for the Epson EcoTank L385 is performed entirely through software and does not require printer disassembly. A Windows computer and a USB connection are sufficient to complete the process safely.

The official reset utility, commonly known as the Reset Epson L385 Tool, communicates directly with the printer firmware to clear the waste ink pad counter without modifying any critical system data.

1 – Download the reset software using the secure link sent to your email address after purchase confirmation.

2 – Activate the program using the unique reset key provided in the same email.

3 – Follow the step-by-step video tutorial available on the download page to complete the reset correctly.

4 – Once the process is finished, turn off the Epson EcoTank L385, wait a few seconds, and power it back on.

What Is the Waste Ink Pad in the Epson EcoTank L385?

The Epson EcoTank L385 contains an internal waste ink absorption system designed to capture excess ink expelled during cleaning cycles and routine printer maintenance.

Each automatic printhead cleaning sends residual ink into this absorber. Over time, the firmware estimates the ink volume stored and prevents further use when the maximum safety level is reached.

To permanently resolve this condition, Epson recommends both maintaining or replacing the waste ink pads and performing the Reset Epson EcoTank L385 to clear the internal counter.

After payment approval, you will receive an email similar to the example below.

This email contains your activation key, the official download link for the Reset Epson EcoTank L385 software, and access to a complete instructional video.

By following the provided instructions, your Epson EcoTank L385 will be safely unlocked and ready for continued use.