Comprehensive Manual to Reset Epson L5138 30D Maintenance Error

Did an error occurred during Reset Epson L5138 30D?

Understanding the All-Lights Blinking Error on the Epson EcoTank L5138

When your Epson EcoTank L5138 printer activates the simultaneous blinking of all its indicator lights, it is indicating a high-level error condition. This behavior is generally linked to the waste ink absorption pad counter exceeding the threshold pre-defined by Epson. To accurately confirm if this is the issue requiring intervention through a 30-Day Reset Tutorial, you must perform an initial diagnostic check.

1 - With the Epson EcoTank L5138 printer powered on, try to print any simple file, such as a PDF document or JPEG image.

2 - Due to the lock state (generalized blinking), a descriptive error message should appear immediately on your monitor via the Epson Status Monitor 3 application.

3 - If no alert is displayed, the drivers may not be installed or may be corrupted. Download and install the official drivers for the Epson EcoTank L5138 from the Epson.com support page.

4 - After reinstalling the drivers, send a print job again and analyze the message that appears in Epson Status Monitor 3. If it mentions "waste ink counter," "end of component life," or "service necessary," the need for a reset is confirmed.

5 - For this specific situation, the most suitable temporary solution is to use the 30-Day Reset program for the Epson EcoTank L5138, which cancels the lock and resets the counter to 100% of its capacity.

6 - It is essential to understand that if the error message refers to other failures such as: paper jam, scanner problem, USB/Network communication error, or ink supply failure, the reset software will not be the appropriate solution.

Procedure for Performing the 30-Day Reset on the Epson EcoTank L5138

1 - Ensure your Epson EcoTank L5138 printer is powered on and connect it directly to your Windows PC using a functional USB cable.

2 - Download the specific 30-Day Reset program for the Epson EcoTank L5138 from our website and activate the utility with the license key sent to your email after payment confirmation.

3 - Follow meticulously each of the steps explained in the video tutorial available with the software download link.

4 - Upon completing the reset sequence, the application will display a prompt requesting to turn off the printer. Disconnect the power from your Epson EcoTank L5138, wait about 15 seconds, and reconnect it.

5 - After rebooting, generate a test page or a diagnostic report to check that your Epson EcoTank L5138 is fully operational and the counter has been reset to 100% for the next 30 days.

6 - If you need additional assistance, we provide technical support through remote assistance to guide you through the entire process, ensuring it is completed correctly and without risk to your equipment.